The Cutrin laser cutting system is designed for high-precision cutting of cylindrical and conical products.
The system can perform both engraving and cutting in a single technological process.
A high-precision travel system allows to punch holes with a diameter of 20 microns and create bridges with a width of 50 microns.
We work with the leading enterprises in the country, which allows us to adapt the systems to most tasks in laser cutting.
The fiber laser sources have a great resource, do not require maintenance, do not have consumables. They are very reliable and can work 24/7.
LED illumination is installed in the lower part of the marking head. It provides additional illumination of the working area, greatly facilitating the work of the operator.
Focusing is the process of adjusting the position of the lens relative to the workpiece to achieve the best processing result. In our laser systems, a green auxiliary laser is built into the marking head at an angle to the optical axis of the lens, it helps to visually determine the position of the focal plane.
The Z-axis electric drive allows automatically moving the marking head vertically, which is useful for marking products of various thickness and for automating the focusing process.
The rotator is a special device designed to automatically rotate the workpiece during laser processing.
Different models of rotators are used for workpieces of different weight and size.
Air exhaust systems ensure the exhaust of air from the laser processing area and its subsequent purification from combustion products, smoke and odors.
Depending on the model, design and configuration of the laser system, Laser Center could recommend air exhaust systems from ULT (Germany), NEVA, or SovPlym (Russia).
ULT air exhaust systems SovPlym air exhaust systems NEVA air exhaust systems